Download Links:

MEGA https://mega.nz/file/ql51xYrJ#rVpw-qvw2CF1CpXLDswdQC0XHNrt19go8VOcLHiGix0 Copy Link MediaFire https://www.mediafire.com/file/dr1sbrlovn4mcy8/Windows_10_PRO_x64.zip/file Copy Link Google Drive https://drive.google.com/file/d/1jB37cE5VBMQwCSX-UZF2mFOYM3pyiORi/view Copy Link M𝚊gnet (𝚃𝚘𝚛𝚛𝚎𝚗𝚝) Download via MAG𝙽ET link Download 𝚃𝚘𝚛𝚛𝚎𝚗𝚝

Installing Windows 10 from a USB Flash Drive: A Step-by-Step Guide using Rufus

Windows 10 is one of the most widely used operating systems in the world, and installing it on a new computer is a common task for many users. Installing Windows 10 from an ISO (Image File) file, such as the Windows 10 USB installer, can be a bit tricky if you don’t know how to use Rufus, but with these step-by-step instructions, you’ll be able to do it easily.

What is Rufus?

Rufus is a free and open-source tool used for writing bootable USB drives. It’s designed to create bootable discs from ISO files, allowing you to install Windows on your computer. Rufus is a simple and user-friendly tool that makes the installation process fast and reliable.

Before You Begin:

• Make sure you have Rufus installed: You can download Rufus from its official website (https://www.rufus-utilities.com/).

• Choose the right version of Windows 10: Ensure that the ISO file for your desired edition of Windows 10 is compatible with Rufus.

• Prepare your USB drive: Make sure your USB drive is clean, free of any dust or debris.

Step-by-Step Instructions:

• Open Rufus: Launch Rufus on your computer and select the USB drive you want to use as the boot device from the drop-down menu.

• Select the ISO file: Choose the Windows 10 ISO file that you downloaded earlier and select it from the list of available files.

• Set the Boot Order: Set the order in which the USB drive should be inserted. You can choose to insert the drive at the top (Boot), second (Partition) or last (Data) position.

• Choose the Boot Device: Select the USB drive as the boot device and set its priority level (High, Medium, Low).

• Create a Boot Sector File: Rufus will create a boot sector file on your USB drive. This process can take around 30 seconds to a minute.

• Insert the USB Drive: Carefully insert the USB drive into any available free space in the computer’s BIOS settings or by pressing the key that corresponds with it (usually F10).

• Wait for Rufus to Write Boot Sector File: Wait for about 1-2 minutes until the boot sector file is fully written onto the USB drive.

• Verify the USB Drive as a Boot Device: Once the process finishes, verify that your computer recognizes the USB drive as a boot device.

Troubleshooting Tips:

• If Rufus doesn’t work, ensure that the USB drive is not inserted and try again.

• Make sure the ISO file and Rufus are compatible with each other.

• Ensure the BIOS settings allow you to read from the USB drive (usually F11 or F12).

By following these steps and tips, you should be able to successfully install Windows 10 from a USB flash drive using Rufus.